Tapered Roller Bearings FAG 32007 -X

The FAG 32007-X single-row tapered roller bearing, with a 35 mm bore and a sheet steel cage, provides a robust bearing arrangement for combined radial and axial forces.

The FAG 32007 -X single-row tapered roller bearing accommodates high radial forces and single-sided axial forces simultaneously. Thanks to its tapered rollers and inclined raceways, this roller bearing transfers combined loads precisely to the shaft and housing. The open design with a sheet steel cage is rated for operation in a temperature range of -30 to +120 degrees. The complete tapered roller bearing has a bore diameter of 35 mm, an outer diameter of 62 mm and a width of 18 mm in the standard version.

In which configurations does the 32007-X tapered roller bearing accommodate axial and radial forces?

This tapered roller bearing is used in designs where rotating shafts must carry not only transverse forces but also unidirectional axial forces. As the bearing is not self-retaining, the outer ring and inner ring, together with the roller cage, can be fitted separately. To accommodate axial forces in both directions, this bearing is usually fitted in pairs, with one bearing positioned in a mirror image to the other.

What are the distinctive features of the sheet steel cage and tolerance class P0?

The sheet steel cage guides the rolling elements and reliably maintains the specified spacing between the tapered rollers. It is suitable for a temperature range of –30 to +120 degrees and is compatible with standard lubricating oils and greases. Manufacture to tolerance class P0 (corresponding to ABEC 1 or standard tolerance) meets the usual dimensional and geometric accuracies required for standard industrial applications. The internal operating clearance is only adjusted during installation by precisely aligning the bearing against the mating bearing.