Tapered Roller Bearings FAG 32219

The FAG 32219 single-row tapered roller bearing, with main dimensions of 95 × 170 × 45.5 mm, withstands high radial and axial loads in continuous industrial operation.

The 32219 tapered roller bearing is designed as an open, single-row roller bearing. Thanks to its tapered raceways and rollers, the design is specifically engineered to withstand combined loads. The integrated sheet steel cage guides the rolling elements along the inner ring raceway and maintains the correct spacing between them. With a bore of 95 mm, an outside diameter of 170 mm and a width of 45.5 mm, this standard FAG design is suitable for demanding shaft diameters in general mechanical engineering.

What is the 32219 tapered roller bearing suitable for?

This bearing is primarily used where single-sided axial forces occur in conjunction with high radial loads. Typical applications include shaft mountings with combined load directions and rigid bearing arrangements with defined guidance. As a single tapered roller bearing can only accommodate axial forces in one direction, in practice they are usually fitted in pairs in an O or X arrangement with a second bearing positioned opposite.

What is important when installing a separable bearing?

Tapered roller bearings are not self-retaining. The inner ring with the roller set can be fitted separately from the outer ring, which simplifies handling during installation. You only set the required operating clearance or bearing clearance during assembly via the mating bearing. You should also note the permissible operating temperature range of -30 to +120 degrees and ensure a suitable external lubricant supply for the open bearing system.