Deep Groove Ball Bearings SKF 6410

The SKF 6410 open deep-groove ball bearing (50x130x31 mm) supports shafts under combined radial and axial loads in industrial applications.

This single-row deep-groove ball bearing 6410 from SKF is designed for rotational movements in machinery and drives. The components are made from standard rolling-element bearing steel (100Cr6), which ensures high dimensional stability under load. As the outer ring is designed without a flange or ring groove, the unit fits into cylindrical housing bores. The combination of deep raceway geometry and optimised manufacturing ensures consistent concentricity at both moderate and higher speeds.

What is the 6410 deep-groove ball bearing suitable for?

Design engineers and maintenance technicians primarily use this bearing in applications where radial forces predominate, but where alternating axial forces in both directions must also be accommodated. Typical applications are found in industrial bearing arrangements with a separate lubrication circuit. The sheet steel cage ensures that the rolling elements are held at a uniform distance apart. This reduces internal friction and promotes smooth running during continuous, long-term operation in technical installations.

What are the key features of the open deep-groove ball bearing 6410?

As an open rolling bearing, this design has no integrated sealing washers. It is therefore particularly suitable for applications where the housing is externally sealed or where oil or recirculating lubrication provides the lubrication. With its standard radial clearance and standard tolerance class P0 (ABEC 1), the component is compatible with standard fit selections for shafts and housings. The permissible temperature range is from -20 to +120 degrees.