Deep Groove Ball Bearings SKF 6207 N

The SKF 6207 N single-row deep-groove ball bearing with a ring groove in the outer ring (35x72x17 mm) enables space-saving axial fixation within the housing.

The SKF 6207 N deep groove ball bearing is made from standard bearing steel (100Cr6) and is designed as a single-row bearing. With a bore of 35 mm, an outer diameter of 72 mm and a width of 17 mm, the design primarily accommodates radial loads and axial forces in both directions. The open design, without sealing washers, allows for direct lubrication via the machine’s lubrication circuit. A sheet steel cage guides the rolling elements at operating temperatures ranging from –20 to +150 degrees Celsius.

What is the 6207 N deep groove ball bearing suitable for in mechanical engineering?

This bearing design is particularly suitable for applications where the structure has limited axial installation space and a simple housing design is required. As it is manufactured to tolerance class P0/PN (corresponding to ABEC 1), the bearing is suitable for standardised shafts and housing bores in general mechanical engineering. The open design offers functional advantages in enclosed gearbox systems, where external seals prevent the ingress of contaminants and allow lubricating oil to flow unhindered through the rolling space.

What is the function of the ring groove in the outer ring?

The suffix ‘N’ indicates a ring groove on the outer ring of the bearing. This groove is designed to accommodate a retaining ring with a positive fit, thereby locking the bearing axially in the housing. There is no need for complex housing shoulders or separate mounting covers, which reduces the manufacturing costs of the housing and saves axial installation space. The integrated standard radial bearing clearance is matched to standard shaft and housing fits to compensate for thermal expansion during operation with minimal friction.