Deep Groove Ball Bearings SKF 6024 /C3

The SKF 6024 /C3 deep groove ball bearing, with a 120 mm bore and increased bearing clearance, offers reliable running characteristics under thermal loads.

The single-row deep groove ball bearing 6024 /C3 is designed as an open rolling bearing for high speeds and combined loads. As it is manufactured from standard 100Cr6 rolling bearing steel, the design primarily accommodates radial loads as well as moderate axial loads in both directions. As this model is designed without integrated sealing washers, the lubricant reaches the rolling elements and raceway unimpeded. The SKF Explorer version is characterised by optimised internal geometry and an improved surface finish on all contact surfaces.

What is the 6024/C3 deep groove ball bearing suitable for in operation?

This bearing is primarily used in industrial drives and mechanical engineering applications where shafts of the corresponding diameters are supported. Design engineers specifically use the open design in enclosed assemblies with oil bath or recirculating lubrication. Thanks to the C3 radial clearance, the deep groove ball bearing is particularly suitable for applications where significant temperature differences occur between the shaft and housing during operation, or where tight fits are used.

What does bearing clearance class C3 mean for bearing installation?

The suffix C3 indicates a radial bearing clearance that is slightly greater than the standard clearance. This additional freedom of movement helps to ensure that the bearing does not become stressed in the housing seat due to operational heating or an oversize fit. For the user, this promotes low-vibration operation and reduces the risk of premature material fatigue. During assembly, care must be taken to ensure that both the cylindrical shaft and the housing are properly prepared so that the increased dimensional accuracy of tolerance class P6 can be fully utilised.