Cylindrical Roller Bearings FAG N203 -E-XL-TVP2

The FAG N203 -E-XL-TVP2 cylindrical roller bearing, with a 17 mm bore and a polyamide cage, provides a separable floating bearing arrangement for high radial loads.

The FAG N203 -E-XL-TVP2 cylindrical roller bearing is a single-row radial roller bearing for industrial applications. Thanks to the line contact between the rolling elements and the raceways, this design can accommodate high radial loads. With key dimensions of a 17 mm bore, 40 mm outer diameter and 12 mm width, the bearing is suitable for compact shaft arrangements. As an open component without an integrated seal, it can be integrated into existing lubrication systems.

When is the N203 -E-XL-TVP2 cylindrical roller bearing suitable as a support bearing?

In mechanical drives, the bearing serves primarily as a pure non-locating bearing to accommodate radial forces. In the N design, the inner ring has two fixed flanges, whilst the outer ring is flangeless. This allows the outer ring to be withdrawn from both ends, which compensates for axial changes in the shaft length caused by temperature differences within the bearing. The design reduces axial stress in bearing arrangements where a separation between fixed and floating bearings is required.

What characteristics does the TVP2 polyamide cage offer in operation?

The TVP2 design refers to a polyamide window cage that reliably maintains the correct spacing between the cylindrical rollers. The material is characterised by its low weight, which reduces inertial forces during rapid speed changes and promotes smooth running. The permissible temperature range is from –30 to +120 degrees Celsius. Thanks to the standard radial clearance and tolerance class P0/PN (equivalent to ABEC 1), the component fits precisely into standardised housing and shaft seats.