FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 15 | 4,91 € | 93,28 € |
| 30 | 9,83 € | 88,36 € |
The FAG NJ213 -E-XL-TVP2-C3 cylindrical roller bearing withstands high radial loads and provides single-sided axial support for shafts measuring 65x120x23 mm.
The NJ213 -E-XL-TVP2-C3 cylindrical roller bearing is a single-row radial roller bearing manufactured by FAG. This design features a cylindrical bore of 65 mm, an outer diameter of 120 mm and a width across flats of 23 mm. Due to the line contact of the cylindrical rollers, this design is suitable for high radial loads. As an open bearing, the bearing housing requires external lubrication and a seal on the housing side.
This design is used in bearing arrangements subject to high radial loads and single-sided axial guidance. The NJ design acts as a support bearing in this context. Two fixed flanges on the outer ring and one fixed flange on the inner ring absorb axial forces from one direction, whilst axial displacement in the opposite direction remains possible. The inner ring can be removed from one side to facilitate installation, which simplifies maintenance work.
The suffix TVP2 denotes a polyamide cage, which is notable for its low weight and promotes smooth running. The classification in bearing clearance class C3 indicates a slightly increased radial bearing clearance compared to the standard value. This reserve serves to compensate for thermal expansion at operating temperatures ranging from -30 to +120 degrees, as well as for tight fits. The bearings are manufactured to the standard tolerance class P0 (ABEC 1).
The bearing has an inner diameter of 65 mm, an outer diameter of 120 mm and a width of 23 mm. The outer ring profile has no ring groove or lubrication bore, meaning that lubricants are supplied via the surrounding structure.
The NJ design features two fixed flanges on the outer ring and one fixed flange on the inner ring. As a result, the component acts as a support bearing that absorbs axial forces in one direction, whilst allowing axial displacement of the shaft relative to the housing in the opposite direction.
As supplied, the C3 bearing has a greater radial clearance than the standard version. This helps to prevent the rolling elements from becoming stressed when temperature differences occur between the inner and outer rings during operation, or when tight fit dimensions on the shaft cause the inner ring to expand.
The TVP2 cage is made of polyamide and ensures that the rollers run quietly and with low friction. Thanks to its low weight, it reduces inertial forces during acceleration. The material is designed for the bearing’s permissible temperature range of -30 to +120 degrees.
As an open bearing, this design does not have any integrated sealing washers. An external seal must therefore be fitted to the bearing housing to prevent the ingress of dirt particles and to retain the lubricant within the bearing housing.
The inner ring is designed to be removable from one side. This allows the inner ring to be fitted separately onto the shaft and the outer ring, together with the roller set, to be fitted into the housing, which makes assembly and disassembly considerably easier in practice.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/