FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 15 | 3,85 € | 73,07 € |
| 30 | 7,70 € | 69,22 € |
The FAG NJ207 -E-XL-M1-C3 cylindrical roller bearing offers high radial load capacity with a 35 mm bore, 72 mm outer diameter and a robust brass cage.
The NJ207 -E-XL-M1-C3 cylindrical roller bearing is a single-row radial roller bearing for industrial applications. In the NJ design, the bearing has two fixed flanges on the outer ring and one fixed flange on the inner ring. This enables it to accommodate not only high radial loads but also axial loads from one direction. The open bearing, which has no integrated seal, operates within a temperature range of –30 to +150 degrees Celsius and can be lubricated via the housing design.
Design engineers and maintenance personnel primarily use this design as a support bearing in shaft mountings with single-sided axial guidance. As the inner ring is removable on one side, the bearing assembly compensates for axial length changes in the shaft in one direction. At the same time, the inner ring flange transmits light axial loads in the opposite direction. These characteristics make the bearing suitable for bearing arrangements where thermal length changes occur and the rings are fitted separately.
The solid brass cage (M1) guides the rollers precisely, even at high speeds, under vibration and during rapid acceleration. The increased radial clearance (C3) counteracts binding caused by heating or tight fits. As the component is of an open design, sealing against dirt and moisture is provided by the surrounding housing structure.
The NJ design features two fixed flanges on the outer ring and one fixed flange on the inner ring. This allows the bearing to function as a support bearing: it transmits axial forces in one direction whilst permitting axial displacement in the opposite direction. Furthermore, the inner ring can be removed separately to facilitate assembly.
The bearing has an internal diameter of 35 mm, an external diameter of 72 mm and a width of 17 mm. These dimensions correspond to the standardised main dimensions for the metric NJ207 series. The component has an outer ring without a lubrication groove or bore.
The suffix M1 denotes a solid brass cage. Brass cages offer high strength combined with low friction torque. They are well suited to environments subject to vibration, fluctuating speeds or higher thermal demands.
The designation C3 indicates a larger radial clearance than in the standard version. It serves as an operational reserve in case the shaft and bearing rings heat up and expand during operation. Even with tight fits, the C3 bearing clearance helps to prevent the rollers from seizing up.
The NJ207 -E-XL-M1-C3 cylindrical roller bearing is specified for an operating temperature range of -30 to +150 degrees Celsius. In practice, the actual operating limits depend on the choice of lubricant and the sealing elements fitted in the housing.
The bearing complies with standard tolerance class P0 (normal tolerance PN), which corresponds to the international classification ABEC 1. This manufacturing precision meets the standard requirements for dimensional accuracy and concentricity in general mechanical and plant engineering.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/