Angular Contact Ball B. FAG 7212 -B-XL-TVP

The FAG 7212 -B-XL-TVP angular contact ball bearing is a single-row rolling bearing with a 60 mm bore, an 110 mm outer diameter and a width of 22 mm.

The single-row angular contact ball bearing 7212 -B-XL-TVP from FAG Rolling Bearings accommodates combined radial and axial loads. Manufactured from standard roller bearing steel (100Cr6), this bearing type provides a dimensionally stable basis for demanding industrial applications. As the axial forces are, by design, only absorbed in one direction, it is usually fitted in operation in conjunction with a second bearing. The unshielded version allows for direct integration into existing lubrication systems.

What is the 7212 -B-XL-TVP angular contact ball bearing suitable for?

This rolling bearing is primarily used in designs where, in addition to radial forces, defined unilateral axial forces are also present. Typical applications can be found in general mechanical engineering in shaft mountings, industrial gearboxes and rotating drives. Thanks to the polyamide cage, the unit operates quietly and with reduced vibration. As this is an open bearing, it is suitable for environments where continuous oil or grease lubrication is provided via the housing.

What are the distinctive features of the 40-degree contact angle and the polyamide cage?

The design with a 40-degree contact angle allows axial forces to be absorbed in one specific direction. Thanks to the angled raceways, the design remains load-bearing under axial loading. The integrated polyamide cage guides the rolling elements with low friction and keeps the overall weight of the unit low. When designing, please note the permissible temperature range of -20 to +120 degrees and the standard tolerance P0/PN or ABEC 1.