-
Bearings
Bearings
-
Housings/housing Units
Housings/housing Units
-
Linear Technology
Linear Technology
-
V-Belts
V-Belts
-
Seals
Seals
FAG
Washers FAG U216
- Technical data
- Inner diameter
- 98 mm
- Outer diameter
- 120 mm
- Width
- 10 mm
- Material
- Steel
- Weight
- 0,21 kg
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 25 | 2,23 € | 42,31 € |
| 35 | 4,46 € | 40,08 € |
Washers FAG U216
The U216 spacer washer from FAG Wälzlager is a dimensionally accurate steel spacer washer with a 98 mm bore, an outer diameter of 120 mm and a width of 10 mm.
The U216 spacer provides designers and maintenance engineers with a precisely fitting component for defined axial clearances in bearing arrangements. The product is manufactured by FAG Wälzlager and is made of steel. Axial bearing designs often require additional washers to ensure the correct positioning of rolling bearings on shafts or within housings. Thanks to its standardised manufacture, the washer ensures clean force transmission and protects adjacent components from axial misalignment.
What is the U216 shim suitable for?
The U216 shim is used in industrial machinery and bearing arrangements. There, it serves as an axial stop, compensating element or support washer for rolling bearings. In designs where axial forces need to be supported via housing or shaft shoulders, this component acts as a load-bearing support. Its flat, circular ring shape ensures even load distribution across the entire end face, thereby reducing stress peaks on adjacent bearing rings.
What are the key considerations regarding the dimensions of the U216 shim?
When fitting the U216 shim, the geometric dimensions are central to the design. The 98 mm bore determines the suitable shaft diameter, whilst the 120 mm outer diameter specifies the required radial installation space within the housing. The washer width of 10 mm precisely defines the axial clearance. Before assembly, it is advisable to check the mating parts to ensure that the washer sits flat and is neither tilted nor impedes the movement of rotating bearing components.
What are the dimensions of the U216 washer?
With an internal diameter of 98 mm, an external diameter of 120 mm and a width of 10 mm, the washer is precisely defined. These dimensions enable it to be used on shafts and in housings for the axial spacing and support of roller bearings.
What material is the U216 washer made of?
The disc is made of steel, which enables it to withstand mechanical compressive loads. The material retains its shape when subjected to axial forces, thereby contributing to the dimensional stability of the mounted assembly during operation.
What is the function of the U216 washer in roller bearings?
In bearing arrangements, the washer acts as an axial spacer or as a bearing surface on shaft and housing shoulders. It compensates for axial clearances, provides flat contact surfaces for bearing rings and distributes any normal forces evenly across the surrounding housing.
What should be borne in mind when fitting the U216 washer?
Before assembly, all contact surfaces should be thoroughly cleaned of any dirt particles. The disc should lie flat against the relevant shoulder to prevent any misalignment, which could lead to wobbling or increased load on the bearings during operation.
For which shaft dimensions is the U216 washer designed?
The disc has a 98 mm bore and is designed for shafts of the appropriate dimensions. Combined with its 120 mm outer diameter and 10 mm width, it serves as a stable abutment surface in the axial force path.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/
10006198