Tapered Roller Bearings SKF 31319

The 31319 tapered roller bearing from SKF Wälzlager, with dimensions of 95 × 200 × 49.5 mm, accommodates high combined radial and axial loads.

The single-row tapered roller bearing 31319 supports shafts under simultaneous radial and axial loads in industrial drives. As a complete tapered roller bearing in the standard design, the unit consists of an inner ring with a set of rollers and the corresponding outer ring. The integrated sheet steel cage guides the tapered rolling elements with low friction. The bearing covers a temperature range of –30 to +120 degrees and complies with the standard tolerance class P0/PN or ABEC 1.

What is the 31319 tapered roller bearing suitable for in industrial plant?

This size is primarily used in mechanical drives and bearing arrangements in mechanical engineering, where unidirectional axial forces act on the shaft alongside high radial loads. Thanks to the angled raceways, the design transfers axial loads directly via the flange. To accommodate alternating axial forces, the bearing is usually fitted in pairs, with one bearing positioned in a mirror image to the other.

What is important when installing a bearing with a sheet steel cage?

As the inner and outer rings can be fitted separately, installation can be carried out in stages. During assembly, care must be taken to set the operating clearance precisely, as the axial bearing clearance is only established when the bearing is aligned against the mating bearing. The integrated sheet steel cage withstands mechanical stresses in the range from -30 to +120 degrees. Before commissioning, the open unit requires a suitable lubricant and an external seal for the housing environment.