Tapered Roller Bearings FAG 33210

The 33210 tapered roller bearing from FAG Wälzlager can withstand high combined radial and axial loads and has standardised dimensions of 50 × 90 × 32 mm.

Single-row tapered roller bearings, such as the 33210, can withstand high radial forces as well as axial forces from one direction. Manufactured by FAG Wälzlager, this bearing consists of an inner ring with a guided set of rollers and a separately mountable outer ring. With a bore of 50 mm, an outside diameter of 90 mm and a width of 32 mm, this component is suitable for demanding shaft mountings. Its design meets standard industry requirements and supports uniform power transmission in mechanical drives.

What is the 33210 tapered roller bearing suitable for in operation?

Typical applications for the 33210 tapered roller bearing include shaft mountings and industrial applications where high radial forces occur simultaneously with unilateral axial forces. As a single bearing can only support axial loads in one direction, it is usually fitted in pairs in an X or O configuration with a second mating bearing. This arrangement provides a rigid and robust shaft mounting.

What are the key features of the 33210 tapered roller bearing with a sheet steel cage?

The integrated sheet steel cage guides the tapered rollers and performs reliably within a temperature range of -30 to +120 degrees. The ability to fit the inner and outer rings separately allows for flexible installation. You adjust the operating clearance during assembly by aligning the bearing against the second bearing. As this is an open design, the bearing housing requires a suitable lubricant before commissioning. The tolerance class P0/PN corresponds to the ABEC 1 standard.