Tapered Roller Bearings FAG 30224

The 30224 tapered roller bearing from FAG Wälzlager reliably withstands combined loads, with dimensions of 120 × 215 × 43.5 mm and a robust roller guide.

The 30224 tapered roller bearing is a single-row roller bearing in a standard design for applications involving simultaneous radial and axial forces. This FAG Wälzlager model has a bore of 120 mm, an outer diameter of 215 mm and a width of 43.5 mm. Thanks to the tapered roller geometry, the rolling elements roll smoothly on the raceways without slippage. This design is primarily used in demanding shaft bearings subject to combined loads.

What loads is the 30224 tapered roller bearing suitable for?

This tapered roller bearing accommodates high axial forces on one side as well as significant radial loads. Designers typically use this type in pairs in an O or X arrangement to absorb axial forces from both directions. Typical applications can be found in general mechanical engineering and in industrial gearbox applications. Thanks to its separable design, users can fit the inner ring together with the roller cage independently of the outer ring, which simplifies installation procedures and inspections.

What is the function of the sheet steel cage in the 30224 tapered roller bearing?

The integrated sheet steel cage keeps the rolling elements spaced apart and prevents direct contact between the tapered rollers. This cage design is resistant to lubricants and vibrations during operation. The bearing covers a temperature range from -30 to +120 degrees and is therefore suitable for industrial environments subject to thermal stress. Manufactured to tolerance class P0/PN (corresponding to ABEC 1), the unit meets the standard requirements for industrial applications.