Tapered Roller Bearings FAG 32032 -X

The FAG 32032 -X tapered roller bearing, with a 160 mm bore and an outer diameter of 240 mm, provides a robust guide for combined radial and axial forces.

The 32032 -X tapered roller bearing is a single-row rolling bearing manufactured by FAG. Thanks to its inclined raceways, this design can accommodate high radial loads as well as unidirectional axial loads. With a width of 51 mm, this bearing is suitable for demanding shaft mountings in mechanical engineering and gearbox construction. The integrated sheet steel cage guides the tapered rollers evenly and keeps friction to a minimum during operation.

What types of loads is the 32032 -X tapered roller bearing suitable for?

Typical applications include gearboxes and shaft guides where combined loads occur. The 32032 -X tapered roller bearing accommodates axial forces from one direction. For axial guidance on both sides, you would normally fit a second bearing in a mirror-image arrangement (X or O arrangement) on the shaft. The separable components facilitate the separate installation of the outer and inner rings together with the roller set.

What are the characteristics of the P0/PN design and tolerance class?

This rolling bearing complies with the standard tolerance class P0/PN (comparable to ABEC 1) and thus meets the usual precision requirements for standard industrial applications. The sheet steel cage is designed for a temperature range of –30 to +120 degrees Celsius. As the bearing is not sealed, you should select the appropriate lubricant and ensure the housing is suitably sealed to suit the prevailing environmental conditions.