H2304 Adapter Sleeves by DIVERS
H2304 Adapter Sleeves by DIVERS

DIVERS

Adapter Sleeves DIVERS H2304

Technical data
 
Inner diameter
17 mm
Outer diameter
32 mm
Width
31 mm
Scope of delivery
With locking washer and groove nut
Design
Standard version
Cone
01:12
Shaft type
For metric shafts
Weight
0,049 kg
Scale quantity Your discount Unit price
10 0,62 € 11,79 €
25 1,24 € 11,17 €
50 1,86 € 10,55 €
12,41 €
exkl. MwSt, zzgl. Versandkosten

37 ready to ship

Adapter Sleeves DIVERS H2304
In Stock

Adapter Sleeves DIVERS H2304

H2304 mounting sleeve for metric shafts with a diameter of 17 mm, 1:12 taper, supplied with a slotted nut and locking plate for correct bearing installation.

The H2304 clamping sleeve is used to secure roller bearings with a tapered bore onto smooth or stepped cylindrical shafts. With a bore of 17 mm, an outside diameter of 32 mm and a width of 31 mm, this machine component is designed for metric shafts. Thanks to the standardised 1:12 taper, the component fits elastically onto the bearing seat when pushed on axially, enabling a secure force-fit without the need for complex shaft shoulders.

What is the H2304 clamping sleeve suitable for in mechanical engineering?

This fastening element is primarily used with self-aligning ball bearings or self-aligning roller bearings with a tapered bore that you wish to mount on cylindrical shafts. The clamping sleeve allows the bearing unit to be positioned freely along the shaft, meaning designers can dispense with additional shaft grooves or shoulders. Tightening the groove nut reduces the radial bearing clearance in a controlled manner, enabling you to set the correct bearing fit even with varying load directions.

What is important regarding the 1:12 taper and the scope of supply?

The sleeve has an external taper with a 1:12 ratio, which must be precisely matched to roller bearings with a corresponding internal taper. The scope of delivery includes the matching groove nut and the associated retaining plate. During assembly, slide the bearing axially onto the sleeve until the required bearing clearance is achieved. A tab on the retaining plate then engages positively with a groove in the nut, preventing accidental loosening during operation.

What are the dimensions of the H2304 clamping sleeve?

The sleeve has a bore diameter of 17 mm, an external diameter of 32 mm and a width of 31 mm. It is designed for metric shafts and accommodates roller bearings with a tapered bore that are designed for this cross-section.

What does the 1:12 taper ratio mean for the H2304 clamping sleeve?

The ratio of 1:12 describes the standardised taper of the conical outer surface. Roller bearings with a corresponding internal taper have this taper and fit precisely onto the outer surface of the clamping sleeve, thereby enabling uniform radial pressure.

Which accessories are included with the H2304 clamping sleeve?

The component is supplied with a groove nut and a retaining plate. The groove nut is used to drive the bearing axially onto the sleeve and to adjust the radial bearing play. The retaining plate then prevents the nut from coming loose of its own accord by bending a retaining tab.

How does the mounting work on a cylindrical shaft?

Tightening the slotted nut causes the inner bearing to move axially onto the taper of the sleeve. In the process, the slotted clamping sleeve is compressed radially and presses against the shaft with a positive fit. Additional fasteners such as retaining rings or shaft shoulders are not required on smooth shafts.

For which types of shafts is this clamping sleeve designed?

The H2304 version is specifically designed for metric cylindrical shafts with a diameter of 17 mm. It can be fitted both to solid shafts of constant diameter and to stepped shafts in conjunction with suitable support rings.

How can you tell if the bearing clearance is set correctly during assembly?

When the bearing is slid onto the clamping sleeve, the radial bearing clearance is measurably reduced. Fitters use a feeler gauge to check the remaining clearance between the rolling elements and the raceway. Once the required clearance has been achieved, the groove nut is tightened and secured with the locking plate.


, ,
,
10001379
Product added to compare.
Product added to wishlist

Reset Password

New Account Register