Self-Aligning Ball B. FAG 2211 -TVH

The FAG 2211-TVH double-row self-aligning ball bearing compensates for misalignment and has dimensions of 55 × 100 × 25 mm.

The 2211-TVH self-aligning ball bearing is a double-row rolling bearing made from standard bearing steel (100Cr6). The hollow spherical raceway in the outer ring allows the bearing to self-align, thereby compensating for shaft deflection. With a bore of 55 mm, an outer diameter of 100 mm and a width of 25 mm, this design is suitable for a wide range of industrial applications. The open design allows for flexible lubricant selection on site.

What is the 2211-TVH self-aligning ball bearing suitable for in practice?

Design engineers and maintenance technicians select this self-aligning ball bearing for shaft mountings where misalignment or elastic shaft deflection occurs. Thanks to the two rows of balls, the assembly primarily absorbs radial loads. Typical applications can be found in general mechanical engineering, in conveyor systems and in gearboxes with solid shafts. As this is an open bearing, the lubricant can be tailored directly to the specific operating environment.

What advantages does the polyamide cage offer in the 2211-TVH?

The polyamide material in the cage reduces the weight of the rolling element set and promotes smooth running. This cage design is rated for a temperature range of –30 to +120 degrees. The component has a standard radial bearing clearance and a tolerance class of P0/PN (corresponding to ABEC 1). Before installation, check that the operating temperatures remain within the specified range and determine which external seal is required for the open roller bearing.