FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 15 | 3,80 € | 72,21 € |
| 30 | 7,60 € | 68,41 € |
The FAG 1215 -K-TVH-C3 self-aligning ball bearing automatically compensates for misalignment with a 75 mm bore, 130 mm outer diameter and 25 mm width.
The double-row self-aligning ball bearing 1215 -K-TVH-C3 from FAG Rolling Bearings is designed for rotating shafts subject to misalignment or deflection. Thanks to the shared hollow-spherical raceway in the outer ring, the two rows of balls align freely during operation. With main dimensions of 75 x 130 x 25 mm, this open rolling bearing primarily accommodates radial loads in industrial drive systems.
Typical applications for this bearing are found in general mechanical engineering, particularly in long shaft runs or where bearing housings are mounted separately. If shafts deflect elastically under operational loads or if there are manufacturing-related misalignments between two bearing positions, the design automatically compensates for these misalignments. This counteracts additional edge stresses on the rolling elements. The integrated polyamide cage is characterised by its low weight and promotes low-vibration operation of the rolling elements.
The suffix ‘K’ denotes a tapered bore with a standardised taper ratio of 1:12. This design can be mounted directly onto a tapered shaft seat or, using a suitable adapter sleeve, onto a cylindrical shaft. When fitted axially, the installed radial clearance is measurably reduced. The factory-increased bearing clearance class C3 helps to ensure that sufficient residual bearing clearance is maintained after press-fitting onto the seat and during operation-related heating.
A hollow-spherical outer ring raceway allows the inner ring, together with the ball cages, to move angularly. The component automatically compensates for shaft deflection and housing misalignment. Fitted with a polyamide cage and manufactured from standard 100Cr6 rolling bearing steel, it is suitable for a wide range of applications in mechanical engineering.
The dimensions are 75 mm internal diameter (tapered), 130 mm external diameter and 25 mm width. The dimensional accuracy complies with the standard specifications for the ‘Normal’ tolerance class (P0 or ABEC 1).
The designation C3 indicates that the radial bearing clearance prior to installation is greater than the standard range. As the tapered bore bearing is radially expanded when pressed onto a shaft or adapter sleeve, the bearing clearance is reduced. The C3 clearance counteracts any straining of the rolling elements once assembly is complete.
The specified operating temperature range is between -30 and +120 degrees Celsius. This range is determined by the polyamide cage (TVH) and the standard roller bearing steel. Use outside these limits may adversely affect the cage material or the lubricant used.
As this bearing does not have integrated seals, the lubricant is applied directly into the housing during assembly. An external housing seal is required to keep out contaminants and minimise the risk of grease or oil leaking out.
Due to the tapered bore with a ratio of 1:12, the unit can be fitted either directly onto a tapered shaft journal or, using a suitable collet, onto a cylindrical shaft. The axial travel regulates the tight fit and the residual bearing play.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/