FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 10 | 0,99 € | 18,89 € |
| 25 | 1,99 € | 17,89 € |
| 50 | 2,97 € | 16,91 € |
The FAG 1204 -K-TVH-C3 self-aligning ball bearing compensates for misalignment and, with dimensions of 20 × 47 × 14 mm and a tapered bore, offers flexible mounting options.
This double-row roller bearing is made from standard roller bearing steel (100Cr6) and features a common hollow-spherical raceway in the outer ring. The 1204 -K-TVH-C3 self-aligning ball bearing thus accommodates misalignment between the shaft and the housing. It is manufactured to tolerance class P0/PN (ABEC 1). Thanks to its open design, this version is suitable for direct lubricant supply within the housing.
This bearing design is primarily used in bearing locations where shaft deflection or misalignment between the bearing seats occurs. Thanks to the spherical outer ring raceway, the two rows of balls adjust their angular position during operation. Typical applications include bearing arrangements with long transmission shafts and elastic deflections. The open design covers an operating temperature range from –30 to +120 degrees.
The suffix ‘K’ refers to the tapered bore with a taper ratio of 1:12. This design allows for direct mounting on tapered shaft journals or, in combination with standardised mounting and withdrawal sleeves, on cylindrical shafts. Fitters adjust the tight fit via the axial travel. The designation C3 stands for a slightly increased radial bearing clearance. This accommodates the expansion of the inner ring during press-fitting and helps to prevent thermal stresses during operation. The polyamide cage ensures low-noise ball entry.
Thanks to the shared hollow-spherical outer ring raceway, the double-row roller bearing automatically compensates for both static and dynamic misalignments. This version has a tapered bore (1:12 taper), measures 20 mm in internal diameter, 47 mm in external diameter and has a width of 14 mm.
The letters TVH denote a polyamide cage. This material reduces the moving mass of the rotating rolling elements, offers good damping properties and contributes to quiet operation. The permissible temperature range for this polyamide cage is from -30 to +120 degrees.
The designation C3 indicates a slightly increased radial clearance in the as-supplied condition compared with the standard clearance. When the tapered bore is fitted onto a tapered seat or a clamping sleeve, the inner ring expands. The increased initial bearing clearance helps to ensure that a functional operating clearance is maintained after the assembly process and as the bearing warms up.
Bearings with the designation letter ‘K’ have a 1:12 taper and are mounted either onto a suitably prepared shaft journal or using a clamping or withdrawal sleeve. The interference fit is achieved by controlled axial displacement of the inner ring. This reduces the radial clearance, which serves as a reference value for the correct fit.
As the spherical roller bearing is designed without integrated seals, the lubricant reaches the raceways directly. The bearing can be operated with either grease or oil. The surrounding housing must be suitably sealed to retain the lubricant and keep out contaminants.
The inner and outer rings, as well as the balls, are made of standard roller bearing steel (100Cr6). This material is characterised by its high load-carrying capacity under cyclic operation. The integrated ball cage is made of polyamide and is designed for temperatures between –30 and +120 degrees.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/