Self-Aligning Ball B. FAG 2201 -TVH

The 2201-TVH double-row self-aligning ball bearing with a 12 mm bore compensates for misalignment and operates quietly thanks to its polyamide cage.

The 2201-TVH self-aligning ball bearing is a double-row radial rolling bearing made from standard 100Cr6 bearing steel. Thanks to the spherical, hollow-ball raceway in the outer ring, the bearing automatically self-aligns in the event of shaft deflection or misalignment. With compact key dimensions of 12 mm inner diameter and 32 mm outer diameter, and a width of 14 mm, this FAG model is suitable for machine designs with limited installation space.

What is the 2201-TVH self-aligning ball bearing suitable for in operation?

This design is intended for rotating shafts where manufacturing-related misalignments between housing seats or elastic deflection under load need to be compensated for. The bearing primarily absorbs radial forces and can also support moderate axial loads in both directions. The double-row ball arrangement distributes the applied loads evenly across the two raceways of the inner ring.

What are the key features of the polyamide cage in the 2201-TVH?

The suffix ‘TVH’ indicates a polyamide cage that reliably guides the rolling elements. This material is characterised by its low weight and reduces operating noise compared to conventional sheet steel cages. The component is designed for a temperature range of –30 to +120 degrees. Due to its open design without integrated sealing washers, the bearing is intended for external housing seals and for lubrication with oil or rolling-element bearing grease.