Self-Aligning Ball B. FAG 2200 -TVH

The FAG 2200-TVH self-aligning ball bearing, measuring 10 × 30 × 14 mm, offers a compact solution for compensating for static and dynamic misalignments.

The double-row 2200-TVH self-aligning ball bearing transmits radial loads and automatically compensates for misalignment between the shaft and housing. Thanks to the shared hollow-spherical raceway in the outer ring, the two rows of balls pivot smoothly. FAG manufactures this rolling bearing from standard bearing steel 100Cr6 in tolerance class P0/PN (ABEC 1) with standard radial clearance. This open-type bearing runs smoothly and is suitable for designs with external seals.

In which applications is the 2200-TVH self-aligning ball bearing used?

This rolling bearing is suitable for designs where shaft deflection or misalignment between the bearing seats occurs. The spherical raceway compensates for misalignment without causing additional wear. With a bore of 10 mm, an outside diameter of 30 mm and a width of 14 mm, the double-row bearing absorbs radial forces whilst allowing the shaft to flex elastically under operational load.

What are the characteristics of the polyamide cage in the -TVH variant?

The polyamide material gives the cage in the 2200 -TVH self-aligning ball bearing elasticity combined with low weight. As a result, the rolling element guidance operates quietly and with low friction. The open bearing allows direct lubricant supply via the housing within a temperature range of -30 to +120 degrees. Lubricating greases or oils must be compatible with the polyamide cage material.