Deep Groove Ball Bearings SKF 6009 -2RS1

The SKF 6009 -2RS1 deep groove ball bearing, measuring 45x75x16 mm, offers protection against dirt and smooth running characteristics thanks to its P6 tolerance.

The 6009 -2RS1 deep groove ball bearing is a single-row radial ball bearing from SKF’s Explorer performance class. With a bore of 45 mm, an outside diameter of 75 mm and a width of 16 mm, this rolling bearing primarily accommodates radial loads as well as moderate axial forces. Manufactured from standard 100Cr6 bearing steel and fitted with a sheet steel cage, the design covers an operating temperature range of -20 to +120 degrees.

What is the 6009-2RS1 deep groove ball bearing suitable for in dusty environments?

This bearing is suitable for rotating shafts and assemblies where protection against contaminants and moisture is required. The seals, which run along both sides, keep the grease inside the bearing protected whilst preventing dirt particles from entering from the outside. This design serves as a sealed bearing for applications where an open bearing would suffer premature wear due to dust. The standard radial bearing clearance ensures stable shaft guidance during operation.

What features do the 2RS1 seal and tolerance class P6 offer?

The 2RS1 design features sealing discs that make contact on both end faces. They seal the rolling element chamber directly against the inner ring shoulders and reduce maintenance requirements to a minimum. Thanks to manufacture to tolerance class P6 or ABEC 3, the bearing exhibits lower runout and dimensional deviations than the standard tolerance. This has a positive effect on the smooth running and dimensional accuracy of the entire bearing assembly.