Deep Groove Ball Bearings FAG 62212 -2RSR

The FAG 62212 -2RSR deep groove ball bearing combines dimensions of 60 × 110 × 28 mm with ground seals on both sides for protected bearing arrangements under predominantly radial loads.

The single-row deep groove ball bearing 62212 -2RSR from FAG accommodates radial loads as well as light axial forces in both directions. With an inside diameter of 60 mm, an outside diameter of 110 mm and a width of 28 mm, this design offers standardised mounting dimensions for industrial machinery and shafts. Manufactured from conventional standard rolling-element bearing steel (100Cr6) and fitted with a sheet steel cage, it ensures smooth running in rotating assemblies.

For which operating conditions is the 62212 -2RSR deep groove ball bearing designed?

Design engineers and users prefer to use the 62212 -2RSR deep groove ball bearing in rotating bearing locations that need to be protected from external particles. The design is suitable for applications where operating temperatures range from -20 to +100 degrees. Thanks to the flangeless cylindrical outer ring, the rolling bearing can be fitted directly into suitable housing bores, whilst the sheet steel cage guides the rolling elements evenly.

What are the key features of this rolling bearing’s 2RSR seal?

The 2RSR designation indicates two abutting sealing lips arranged on both sides. These come into contact with the inner ring and form a functional barrier against the ingress of dust and moisture. At the same time, they retain the lubricant inside the bearing. As contact seals inherently involve a certain amount of friction due to their design, this variant is suitable for environments exposed to dust or moisture. The standard radial bearing clearance supports typical installation conditions.