Deep Groove Ball Bearings SKF 6030 -2RS1

The SKF 6030 -2RS1 deep groove ball bearing offers protection on both sides via lip seals and has dimensions of 150 x 225 x 35 mm.

The 6030-2RS1 deep groove ball bearing is a single-row radial ball bearing made from standard 100Cr6 rolling bearing steel. The bearing is manufactured by SKF and has a bore of 150 mm, an outside diameter of 225 mm and a width of 35 mm. The design accommodates radial loads as well as axial forces in both directions. Thanks to its manufacture to standard tolerances (P0/PN or ABEC 1), this rolling bearing fits into standardised housing and shaft seats.

In which applications does the 6030-2RS1 deep groove ball bearing prove its worth?

This deep-groove ball bearing is designed for shaft diameters of 150 mm, where axial loads occur in addition to radial forces. An integrated sheet steel cage guides the rolling elements evenly within the raceway and ensures smooth running. Thanks to the double-sided sealing, this design is particularly suitable for operating environments where protection against dust and moisture is required.

What are the characteristics of the 2RS1 seal at normal bearing clearance?

The seal, which runs against the raceway on both sides, shields the interior against the ingress of dirt particles and moisture and retains the grease within the rolling element chamber. The version with standard radial bearing clearance is designed for operating conditions where there are no significant temperature differences between the inner and outer rings. With a temperature range of -20 to +120 degrees, the component covers typical operating conditions.