Deep Groove Ball Bearings FAG 16017

The FAG 16017 deep-groove ball bearing, measuring 85 × 130 × 14 mm, offers a particularly narrow design for radial loads.

The single-row deep-groove ball bearing 16017 is an open rolling bearing made from standard rolling bearing steel (100Cr6). Thanks to its narrow cross-sectional width of just 14 mm with an 85-mm bore, this design is suitable for compact constructions where axial installation space is limited. It is manufactured to the standard tolerance class P0/PN (corresponding to ABEC 1) with standard radial clearance. A robust sheet steel cage guides the rolling elements evenly through the deep raceways of the inner and outer rings.

What is the FAG 16017 deep groove ball bearing suitable for?

Design engineers turn to the 16017 deep groove ball bearing when large-diameter shafts need to be supported, but the housing space in the axial direction is limited. This bearing primarily absorbs radial forces, but also supports the shaft under moderate axial forces in both directions. Typical applications are found where rotating components are mounted with limited axial installation space. The open design allows for use in oil-lubricated housings, where the lubricant can circulate unimpeded.

What are the key considerations for the open version of the 16017?

As this bearing has no integrated seals, protection against contamination must be provided by the surrounding machine housing. Dirt particles or moisture must not be allowed to penetrate the raceways. The permissible temperature range is from –20 to +150 degrees Celsius, making the bearing suitable for thermally demanding environments. When designing the system, take care when selecting the lubricant: open roller bearings require a suitable oil or grease lubrication to ensure low-friction operation, which you should check regularly as part of your maintenance schedule.