FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 15 | 2,84 € | 53,95 € |
| 30 | 5,68 € | 51,11 € |
The FAG NJ210 -E-XL-TVP2 cylindrical roller bearing (50x90x20 mm) accommodates high radial loads and unilateral axial forces in a stable and low-noise manner.
This single-row cylindrical roller bearing, model NJ210 -E-XL-TVP2, is manufactured by FAG and belongs to the group of radial roller bearings. Thanks to its cylindrical rolling elements, it offers a line-contact surface that can accommodate considerable radial forces. In the NJ design, the outer ring has two solid flanges, whilst the inner ring has a flange on one side. This makes the bearing suitable for use as a support bearing, which fixes the shaft in one axial direction whilst simultaneously allowing for axial length compensation in the opposite direction.
Designs subject to heavy radial loads and one-sided axial guidance forces require this bearing type. Typical applications include shaft mountings that must accommodate radial forces and axial guidance. As the inner ring is removable on one side, the bearing can be fitted separately onto the shaft and housing. The open bearing is designed for installation in protected spaces where lubrication is provided by the surrounding structure.
The design suffix TVP2 indicates a polyamide cage. This cage guides the rollers precisely, runs quietly and, thanks to its low weight, reduces friction during operation. An operating temperature range of -30 to +120 degrees is permitted for this application. In terms of dimensional tolerance, the bearing complies with standard tolerance class P0/PN or ABEC 1. The standard radial bearing clearance provides the appropriate operating clearance for common shaft fits in mechanical engineering.
With an internal diameter of 50 mm, an external diameter of 90 mm and a width of 20 mm, the bearing complies with standardised key dimensions. These dimensions enable it to be used as a direct replacement in standardised bearing housings.
A characteristic feature of the NJ design is the presence of two integrated flanges on the outer ring and a fixed flange on the inner ring. This enables the bearing to act as a support bearing: in addition to radial forces, it also absorbs axial guidance forces from one direction, whilst the opposite side remains axially movable.
The code TVP2 denotes a polyamide cage. This material is characterised by low inertia and quiet running. This version is suitable for the intended operating temperature range of -30 to +120 degrees.
As an open roller bearing, this design does not feature any integrated sealing washers. Lubrication with grease or oil, as well as protection against dust and moisture, must therefore be provided by the surrounding housing structure.
Normal radial bearing clearance (CN) refers to the factory-set radial clearance between the rollers and raceways when the bearing is in its unassembled state. It serves to provide the required operating clearance once the bearing rings have been pressed onto the shaft and housing.
The inner ring of the bearing is designed to be removable from one side. This facilitates installation, as the inner and outer rings can be fitted separately onto the shaft and into the housing, and then aligned axially.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/