NJ210 -E-XL-TVP2 Cylindrical Roller Bearings by FAG
NJ210 -E-XL-TVP2 Cylindrical Roller Bearings by FAG

FAG

Cylindrical Roller Bearings FAG NJ210 -E-XL-TVP2

Technical data
 
Inner diameter
50 mm
Outer diameter
90 mm
Width
20 mm
Roller rows
Single row bearing
Seal
None, open bearing
Clearance
Normal radial clearance
Running accuracy
Tolerance class P0/PN2 / ABEC 1
Current insulation
No current insulation
Bore
Cylindrical bore
Outer ring
Without groove/lubrication holes
Weight
0,502 kg
Scale quantity Your discount Unit price
15 2,39 € 45,33 €
30 4,77 € 42,95 €
47,72 €
exkl. MwSt, zzgl. Versandkosten

177 ready to ship

Cylindrical Roller Bearings FAG NJ210 -E-XL-TVP2
In Stock

Cylindrical Roller Bearings FAG NJ210 -E-XL-TVP2

The FAG NJ210 -E-XL-TVP2 cylindrical roller bearing (50x90x20 mm) accommodates high radial loads and unilateral axial forces in a stable and low-noise manner.

This single-row cylindrical roller bearing, model NJ210 -E-XL-TVP2, is manufactured by FAG and belongs to the group of radial roller bearings. Thanks to its cylindrical rolling elements, it offers a line-contact surface that can accommodate considerable radial forces. In the NJ design, the outer ring has two solid flanges, whilst the inner ring has a flange on one side. This makes the bearing suitable for use as a support bearing, which fixes the shaft in one axial direction whilst simultaneously allowing for axial length compensation in the opposite direction.

Where is the NJ210 -E-XL-TVP2 cylindrical roller bearing used as a support bearing?

Designs subject to heavy radial loads and one-sided axial guidance forces require this bearing type. Typical applications include shaft mountings that must accommodate radial forces and axial guidance. As the inner ring is removable on one side, the bearing can be fitted separately onto the shaft and housing. The open bearing is designed for installation in protected spaces where lubrication is provided by the surrounding structure.

What are the characteristics of the polyamide cage and the NJ design?

The design suffix TVP2 indicates a polyamide cage. This cage guides the rollers precisely, runs quietly and, thanks to its low weight, reduces friction during operation. An operating temperature range of -30 to +120 degrees is permitted for this application. In terms of dimensional tolerance, the bearing complies with standard tolerance class P0/PN or ABEC 1. The standard radial bearing clearance provides the appropriate operating clearance for common shaft fits in mechanical engineering.

What are the dimensions of the NJ210 -E-XL-TVP2 cylindrical roller bearing?

With an internal diameter of 50 mm, an external diameter of 90 mm and a width of 20 mm, the bearing complies with standardised key dimensions. These dimensions enable it to be used as a direct replacement in standardised bearing housings.

What does the ‘NJ’ design designation mean for this cylindrical roller bearing?

A characteristic feature of the NJ design is the presence of two integrated flanges on the outer ring and a fixed flange on the inner ring. This enables the bearing to act as a support bearing: in addition to radial forces, it also absorbs axial guidance forces from one direction, whilst the opposite side remains axially movable.

What is the function of the TVP2 polyamide cage?

The code TVP2 denotes a polyamide cage. This material is characterised by low inertia and quiet running. This version is suitable for the intended operating temperature range of -30 to +120 degrees.

Is the NJ210 -E-XL-TVP2 cylindrical roller bearing sealed?

As an open roller bearing, this design does not feature any integrated sealing washers. Lubrication with grease or oil, as well as protection against dust and moisture, must therefore be provided by the surrounding housing structure.

What does the specification for the standard radial bearing clearance mean?

Normal radial bearing clearance (CN) refers to the factory-set radial clearance between the rollers and raceways when the bearing is in its unassembled state. It serves to provide the required operating clearance once the bearing rings have been pressed onto the shaft and housing.

Can the inner ring be removed during assembly?

The inner ring of the bearing is designed to be removable from one side. This facilitates installation, as the inner and outer rings can be fitted separately onto the shaft and into the housing, and then aligned axially.

Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/

10002149
Product added to compare.
Product added to wishlist

Reset Password

New Account Register