Angular Contact Ball B. SKF 7202 BEP

The SKF 7202 BEP angular contact ball bearing, measuring 15x35x11 mm, offers a compact solution for combined radial and axial loads.

The 7202 BEP angular contact ball bearing is a single-row rolling bearing made from standard bearing steel (100Cr6). Thanks to its inclined raceways, the design can accommodate both radial and axial forces in one direction simultaneously. Designed as an open bearing, the bearing housing requires an external lubricant and an application-specific housing seal. The component covers an operating temperature range of –20 to +120 degrees and operates with normal radial clearance in the standard tolerance class P0/PN or ABEC 1.

What is the 7202 BEP angular contact ball bearing suitable for?

Design engineers and maintenance personnel use this bearing when shafts must withstand not only radial forces but also defined axial thrusts in one direction. Typical applications include bearing arrangements with combined loads where precise one-sided axial support is required. As a single angular contact ball bearing, by its very design, can only accommodate axial forces from one side, in practice it is usually fitted in a set-up against a second bearing or as part of a specifically preloaded bearing set.

What is the function of the 40-degree contact angle and the polyamide cage?

The letter B in the suffix denotes a contact angle of 40 degrees, whilst the E indicates an optimised internal design. This steep contact angle enables the bearing to absorb axial forces. The ball-guided polyamide cage (designation P) ensures quiet running and is characterised by low friction. As the outer ring has no flange or groove, the component can be fitted cylindrically into smooth housing bores.