Deep Groove Ball Bearings SKF 6200

The SKF 6200 deep groove ball bearing is an open, single-row rolling bearing measuring 10x30x9 mm, designed for a wide range of radial loads.

The 6200 deep groove ball bearing is one of the most commonly used designs amongst radial bearings. This single-row rolling bearing from SKF consists of an inner and outer ring made from standard bearing steel 100Cr6, as well as balls made from the same material. In the SKF Explorer version, the component has a dimensional accuracy of P6 and a running accuracy of P5. With its dimensions of a 10 mm bore, 30 mm outer diameter and 9 mm width, it is suitable for a wide range of mounting applications in industry and trade.

What operational requirements does the 6200 open deep-groove ball bearing meet?

The open deep-groove ball bearing 6200 is primarily used in clean environments where external lubrication or a sealed housing is provided. It is suitable for applications involving predominantly radial loads and moderate axial forces. As the component is open at both ends, the lubricant reaches the raceways and balls unhindered. The rolling bearing is designed for operating temperatures ranging from -20 to +120 degrees Celsius.

What do dimensional accuracy P6 and running accuracy P5 mean for the 6200 deep groove ball bearing?

The combination of P6 and P5 describes a manufacturing quality that is more precise than the standard tolerance. Class P6 narrows the tolerances of the mating dimensions on the inner and outer rings, which promotes a precise fit on the shaft and housing. The P5 grade reduces runout deviations in the rotating rings. Together with the standard radial bearing clearance, this bearing ensures smooth, even running. During design, you should provide for external sealing elements, as the bearing itself does not have any sealing washers.