Deep Groove Ball Bearings SKF 16022

The SKF 16022 deep groove ball bearing, measuring 110 × 170 × 19 mm, offers a narrow design for radial loads at high speeds.

The 16022 deep groove ball bearing is an open, single-row radial ball bearing from SKF in the Explorer series. With a bore of 110 mm, an outside diameter of 170 mm and a narrow width of 19 mm, this component is suitable for bearing arrangements with limited axial installation space. Manufactured from standard rolling-element bearing steel 100Cr6 and guided by a robust sheet steel cage, the bearing primarily accommodates radial loads as well as moderate axial forces in both directions.

In which industrial applications is the 16022 deep-groove ball bearing used?

Design engineers and maintenance technicians turn to the 16022 deep-groove ball bearing when rotating shafts need to be precisely supported within compact external dimensions. Typical applications can be found in general mechanical engineering as well as in housing designs with limited axial dimensions. As the bearing is of an open design, the lubricant can circulate freely, depending on the system design. This is particularly suitable for applications operating within enclosed housings and supplied with oil or grease via a central lubrication system.

What are the distinguishing features of the version with P6 tolerance and standard bearing clearance?

This bearing combines standard radial bearing clearance with increased dimensional accuracy of class P6, whilst maintaining standard PN running accuracy. The tighter P6 tolerance makes it easier to achieve precise fits on the shaft and housing. In combination with the standard bearing clearance, the system operates with low vibration at standard operating temperatures between –20 and +120 degrees. When installing, ensure that the mating surfaces are clean and that the housing is suitably sealed externally to protect the open bearing from contamination.