Deep Groove Ball Bearings FAG 6201

The FAG 6201 deep-groove ball bearing is an open, single-row rolling bearing with an outer diameter of 32 mm and a width of 10 mm, designed for a wide range of industrial applications.

This radial ball bearing, made from standard bearing steel, primarily absorbs radial forces and, due to its design, can also withstand axial loads in both directions. The cylindrical bore allows the component to be mounted directly onto a suitable shaft. The integrated sheet steel cage guides the rolling elements evenly in the deep raceways and ensures smooth running during continuous operation.

What is the 6201 deep groove ball bearing suitable for?

Design engineers and maintenance technicians use this bearing when rotating machine parts need to be supported at moderate to higher speeds. It is primarily used in compact shaft arrangements subject to combined loads. As the design is rated for a temperature range of -30 to +120 °C, it effectively covers the typical operating conditions found in general mechanical and plant engineering.

What should be borne in mind regarding the open design and the bearing clearance?

As an open bearing, this design has no integrated seals or cover plates. The lubricant, usually oil or grease, must therefore be supplied via the surrounding housing and protected from contamination by external seals. The component has the standard radial bearing clearance. This factory-set operating clearance between the balls and raceways is selected so that the fit runs without binding after being pressed onto the shaft.