Deep Groove Ball Bearings FAG 16036 -C3

The FAG 16036 -C3 deep-groove ball bearing is an open, single-row rolling bearing with a 180 mm bore and increased C3 clearance.

The FAG 16036 -C3 deep groove ball bearing accommodates radial loads as well as axial forces in both directions. Manufactured from standard roller bearing steel 100Cr6, this design features a dimensionally stable sheet steel cage which reliably maintains the correct spacing between the rolling elements. As this is an open bearing without integrated sealing washers, the rolling bearing can be flexibly lubricated with lubricating oil or rolling-bearing grease via the housing.

Where is the 16036 -C3 deep groove ball bearing used?

Due to its dimensions – with a bore of 180 mm, an outside diameter of 280 mm and a width of 31 mm – this roller bearing is primarily used in large-scale industrial bearing arrangements designed for combined loads. Thanks to its comparatively slim cross-section, this design is particularly suitable for installation situations with limited radial space. Single-row deep-groove ball bearings of this size support designs where uniform concentricity and low-vibration operation under continuous load are required.

What is the function of the increased bearing clearance C3?

The suffix C3 indicates a slightly increased radial clearance compared with the standard version. This additional clearance between the balls and raceways is beneficial whenever significant temperature differences occur between the inner and outer rings during operation. If the shaft expands more than the surrounding housing due to heat, the C3 bearing clearance compensates for this expansion and specifically prevents the bearing from becoming stressed. Furthermore, the increased radial clearance facilitates tight fits on both the shaft and the housing.