Deep Groove Ball Bearings FAG 6026

The FAG 6026 deep-groove ball bearing, measuring 130 × 200 × 33 mm, is an open-type bearing designed for radial and axial loads in mechanical engineering.

The 6026 deep-groove ball bearing is a single-row rolling bearing manufactured by FAG for applications in drive technology and general mechanical engineering. The design features a bore of 130 mm, an outer diameter of 200 mm and a width of 33 mm. Manufactured from standard rolling bearing steel 100Cr6, this open bearing features rolling elements and rings with high dimensional accuracy. As a versatile bearing, it accommodates radial loads as well as moderate axial forces in both directions.

Under what operating conditions is the 6026 deep groove ball bearing used?

Shaft bearings with corresponding diameters require precise guidance under radial and axial loads. Owing to its dimensions, the 6026 deep groove ball bearing is used in industrial drives and supported shaft lines. The open design without integrated seals allows unhindered access of lubricant via a surrounding lubrication system. This enables the lubrication to be specifically tailored to the application. Without abrasive seals, the friction torque remains low.

What are the characteristics of the open design with a sheet steel cage?

The bearing is fitted with a sheet steel cage, which keeps the rolling elements spaced apart and guides them evenly. With standard radial bearing clearance and tolerance class P0 or ABEC 1, this design meets standardised fit requirements. An operating temperature range of –20 to +150 degrees is specified for this application. As no sealing washers are fitted as standard, an external housing seal must be provided to prevent the ingress of dirt and the loss of lubricant.