Cylindrical Roller Bearings FAG NJ316 -E-XL-TVP2

The FAG NJ316 -E-XL-TVP2 cylindrical roller bearing, measuring 80x170x39 mm, provides a robust support bearing for high radial forces.

The FAG NJ316 -E-XL-TVP2 cylindrical roller bearing is a single-row rolling bearing designed for demanding industrial applications involving high radial forces. Thanks to the line contact between the cylindrical rollers and the raceways, the design can withstand high radial forces. The open bearing has an 80 mm bore, an outer diameter of 170 mm and a width of 39 mm. The polyamide cage guides the cylindrical rollers accurately and ensures low-vibration, stable operation of the rotating components.

In which applications is the NJ316 -E-XL-TVP2 cylindrical roller bearing used?

This rolling bearing is primarily used where high radial loads are present and the bearing is required to accommodate axial changes in shaft length. As a support bearing, the NJ design accommodates not only radial forces but also axial loads from one direction. As the inner ring is removable from one side, the bearing can be assembled separately, which simplifies the installation of the components into the housing.

What are the key features of the TVP2 version with a polyamide cage?

The integrated polyamide cage is characterised by its low weight and elastic material properties. This reduces dynamic mass forces during operation, contributing to smooth running. The bearing is designed for a temperature range of -30 to +120 degrees. As this is an open bearing without a seal, a protected environment and a continuous supply of lubricant are required.