FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 15 | 3,40 € | 64,53 € |
| 30 | 6,79 € | 61,14 € |
The NJ211 -E-XL-TVP2 cylindrical roller bearing from FAG Wälzlager combines a high radial load capacity (55 × 100 × 21 mm) with single-sided axial guidance as a support bearing.
The NJ211 -E-XL-TVP2 cylindrical roller bearing from FAG Wälzlager, as a single-row radial roller bearing, withstands high radial loads. Thanks to the NJ design, this open bearing features two fixed flanges on the outer ring and one fixed flange on the inner ring. This enables it to support shafts in an axial direction, whilst the inner ring remains removable on one side for installation. With key dimensions of a 55 mm bore, 100 mm outer diameter and 21 mm width, this design meets standard installation requirements in mechanical engineering.
This support bearing design is primarily used where high radial forces act on the shaft and, at the same time, single-sided axial fixation is required. The bearing allows axial length changes of the shaft in the opposite direction without restriction. Thanks to the lightweight polyamide cage (TVP2), the bearing operates with low vibration and smoothly. In sealed housings with an existing lubrication supply, this open-type bearing operates within a temperature range of -30 to +120 degrees.
The NJ design facilitates assembly, as the outer and inner rings can be press-fitted separately. During operation, the bearing guides the shaft axially in one direction, whilst the standard radial bearing clearance ensures the necessary operational compensation under standard conditions. The polyamide cage reduces friction and the mass of the rolling element guide. As the outer ring is designed without a groove or lubrication bore, the lubricant is supplied directly via the end faces of the bearing seat.
With an internal diameter of 55 mm, an external diameter of 100 mm and a width of 21 mm, the component complies with the dimensions of tolerance class P0/PN or ABEC 1. The open bearing has neither lubrication grooves nor lubrication holes on the outer ring.
In the NJ design, the outer ring has two fixed guide flanges, whilst the inner ring has only one flange. The bearing therefore acts as a support bearing: in addition to heavy radial loads, it also absorbs axial forces from one direction. The inner ring can be removed from one side for separate installation.
The polyamide (TVP2) cage guides the cylindrical rollers quietly and with low friction. Its low weight minimises centrifugal forces within the bearing. The material is designed for continuous operation in a temperature range of -30 to +120 degrees and is compatible with standard lubricants.
A pure thrust bearing allows axial displacement of the shaft in both directions to compensate for thermal expansion. The NJ211 support bearing limits this displacement in one direction by means of the fixed flange on the inner ring. Axial displacement remains possible in the opposite direction.
As this bearing is supplied without integrated sealing washers, it requires a clean installation environment with a lubricant supply via the machine housing. Depending on the application, lubricate the rolling elements with grease or lubricating oil. As the outer ring has no lubrication bore, the lubricant enters axially via the bearing end faces.
The standard factory clearance between the cylindrical rollers and the raceways, when the bearing is unassembled, compensates for the usual reduction in fit that occurs when the bearing rings are pressed into place. This ensures reliable operation under normal thermal operating conditions.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/