NJ211 -E-XL-TVP2 Cylindrical Roller Bearings by FAG
NJ211 -E-XL-TVP2 Cylindrical Roller Bearings by FAG

FAG

Cylindrical Roller Bearings FAG NJ211 -E-XL-TVP2

Technical data
 
Inner diameter
55 mm
Outer diameter
100 mm
Width
21 mm
Roller rows
Single row bearing
Seal
None, open bearing
Clearance
Normal radial clearance
Running accuracy
Tolerance class P0/PN2 / ABEC 1
Current insulation
No current insulation
Bore
Cylindrical bore
Outer ring
Without groove/lubrication holes
Weight
0,678 kg
Scale quantity Your discount Unit price
15 4,05 € 76,79 €
30 8,08 € 72,76 €
80,84 €
inkl. MwSt, zzgl. Versandkosten

74 ready to ship

Cylindrical Roller Bearings FAG NJ211 -E-XL-TVP2
In Stock

Cylindrical Roller Bearings FAG NJ211 -E-XL-TVP2

The NJ211 -E-XL-TVP2 cylindrical roller bearing from FAG Wälzlager combines a high radial load capacity (55 × 100 × 21 mm) with single-sided axial guidance as a support bearing.

The NJ211 -E-XL-TVP2 cylindrical roller bearing from FAG Wälzlager, as a single-row radial roller bearing, withstands high radial loads. Thanks to the NJ design, this open bearing features two fixed flanges on the outer ring and one fixed flange on the inner ring. This enables it to support shafts in an axial direction, whilst the inner ring remains removable on one side for installation. With key dimensions of a 55 mm bore, 100 mm outer diameter and 21 mm width, this design meets standard installation requirements in mechanical engineering.

What is the NJ211 -E-XL-TVP2 cylindrical roller bearing suitable for?

This support bearing design is primarily used where high radial forces act on the shaft and, at the same time, single-sided axial fixation is required. The bearing allows axial length changes of the shaft in the opposite direction without restriction. Thanks to the lightweight polyamide cage (TVP2), the bearing operates with low vibration and smoothly. In sealed housings with an existing lubrication supply, this open-type bearing operates within a temperature range of -30 to +120 degrees.

What are the advantages of the NJ design with a polyamide cage?

The NJ design facilitates assembly, as the outer and inner rings can be press-fitted separately. During operation, the bearing guides the shaft axially in one direction, whilst the standard radial bearing clearance ensures the necessary operational compensation under standard conditions. The polyamide cage reduces friction and the mass of the rolling element guide. As the outer ring is designed without a groove or lubrication bore, the lubricant is supplied directly via the end faces of the bearing seat.

What are the dimensions of the NJ211 -E-XL-TVP2 cylindrical roller bearing?

With an internal diameter of 55 mm, an external diameter of 100 mm and a width of 21 mm, the component complies with the dimensions of tolerance class P0/PN or ABEC 1. The open bearing has neither lubrication grooves nor lubrication holes on the outer ring.

What does the ‘NJ’ design designation mean for this roller bearing?

In the NJ design, the outer ring has two fixed guide flanges, whilst the inner ring has only one flange. The bearing therefore acts as a support bearing: in addition to heavy radial loads, it also absorbs axial forces from one direction. The inner ring can be removed from one side for separate installation.

What are the key features of the TVP2 polyamide cage?

The polyamide (TVP2) cage guides the cylindrical rollers quietly and with low friction. Its low weight minimises centrifugal forces within the bearing. The material is designed for continuous operation in a temperature range of -30 to +120 degrees and is compatible with standard lubricants.

How does a support bearing differ from a non-support bearing?

A pure thrust bearing allows axial displacement of the shaft in both directions to compensate for thermal expansion. The NJ211 support bearing limits this displacement in one direction by means of the fixed flange on the inner ring. Axial displacement remains possible in the opposite direction.

What type of lubrication does the NJ211 open cylindrical roller bearing require?

As this bearing is supplied without integrated sealing washers, it requires a clean installation environment with a lubricant supply via the machine housing. Depending on the application, lubricate the rolling elements with grease or lubricating oil. As the outer ring has no lubrication bore, the lubricant enters axially via the bearing end faces.

What does the standard radial bearing clearance indicate for this bearing?

The standard factory clearance between the cylindrical rollers and the raceways, when the bearing is unassembled, compensates for the usual reduction in fit that occurs when the bearing rings are pressed into place. This ensures reliable operation under normal thermal operating conditions.

Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/

10002163
Product added to compare.
Product added to wishlist

Reset Password

New Account Register