Axial Deep Groove Ball B. FAG 52310

The 52310 double-acting axial deep-groove ball bearing from FAG Wälzlager (40x95x58 mm) reliably accommodates high axial loads from both directions.

The 52310 axial deep-groove ball bearing from FAG Wälzlager is a specialised component designed for the precise guidance of shafts under purely axial loads. Constructed from standard rolling-bearing steel (100Cr6) with a robust sheet steel cage, the bearing withstands thermal stresses in the range from –30 to +150 degrees Celsius. Manufactured to tolerance class P0/PN or ABEC 1, it ensures reliable dimensional accuracy in mechanical engineering. You receive a robust component for demanding axial bearing applications.

What is the 52310 double-acting axial deep groove ball bearing suitable for?

This rolling bearing is used wherever axial forces occur in both directions and shafts need to be precisely positioned. Typical applications include shaft mountings and assemblies in which alternating thrust forces act. As the bearing is designed to accommodate axial forces only, designers typically combine it in practice with separate radial bearings. Pure axial loads are thus systematically transferred to the housing without imposing radial stresses on the rolling elements.

What should be taken into account when mounting the double-acting design?

The 52310 axial deep-groove ball bearing is a rigid, non-angle-adjustable design without shims. Consequently, the design requires perpendicular and flat-machined contact surfaces on the housing and shaft shoulder, as misalignment cannot be automatically compensated for. The centre shaft ring is fixed to the shaft, whilst the two outer housing rings are seated in the housing. Proper lubrication helps to minimise friction on the sheet steel cage during operation.