-
Bearings
Bearings
-
Housings/housing Units
Housings/housing Units
-
Linear Technology
Linear Technology
-
V-Belts
V-Belts
-
Seals
Seals
FAG
L-section Rings FAG HJ2316 -E
- Technical data
- Inner diameter
- 80 mm
- Outer diameter
- 110,6 mm
- Width
- 20 mm
- Material
- Steel
- Weight
- 0,48 kg
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 2 | 9,48 € | 180,16 € |
| 5 | 18,97 € | 170,67 € |
L-section Rings FAG HJ2316 -E
The FAG HJ2316-E steel angular ring, measuring 80 x 110.6 x 20 mm, serves as a flange for cylindrical roller bearings.
The FAG HJ2316-E angular ring complements cylindrical roller bearings to accommodate axial loads. This steel component has a bore of 80 mm, an outer diameter of 110.6 mm and a width of 20 mm. When used in conjunction with the appropriate bearing, the ring enables axial fixation on the shaft. The separate design of the bearing and the flange ring facilitates assembly and disassembly in mechanical engineering.
What is the HJ2316-E angular ring suitable for in industrial plant?
The angular ring is fitted together with radial cylindrical roller bearings to absorb axial forces in one direction. Typical applications are found in bearing arrangements where cylindrical roller bearings must support not only radial loads but also unilateral axial loads. The ring supports the inner ring of the bearing and provides an additional contact surface for the end faces of the rolling elements.
What is the function of the ‘E’ design in the HJ2316-E angular contact ring?
The suffix ‘E’ denotes the reinforced version, designed to be compatible with modern FAG cylindrical roller bearings. When designing the assembly, it is important to ensure that the dimensions – an 80 mm inner diameter and a 110.6 mm outer diameter – fit the bearing exactly. As the angular ring is made of steel, its flat surface is suitable for mechanical loads. During assembly, the shaft and bearing ring must be in flush contact.
What is the function of the HJ2316-E angle ring?
As a loose flange ring, this angular ring enables the axial guidance of cylindrical roller bearings on the shaft. By being fitted against the inner ring, it creates a bearing arrangement capable of withstanding unilateral axial forces. At the same time, the bearing unit remains easy to dismantle for maintenance work.
What are the dimensions of the HJ2316-E angle ring?
The component is dimensioned with a bore of 80 mm, an outer diameter of 110.6 mm and a width of 20 mm. These dimensions are designed to fit corresponding reinforced cylindrical roller bearings. Before installation, the shaft seat should be checked for a precise fit.
What material is the HJ2316-E angle ring made of?
FAG manufactures this angular ring from steel. The material offers wear resistance on the contact surfaces along which the roller end faces slide. This makes the ring suitable for mechanical stresses and ensures it retains its dimensional stability.
What does the ‘-E’ marking on this angle ring mean?
The suffix ‘E’ denotes a reinforced design by the manufacturer FAG with adapted geometry. It indicates that the bearing is designed to be paired with cylindrical roller bearings of the reinforced ‘E’ design. When replacing components, parts with matching suffixes should be used to ensure that the mating surfaces are precisely aligned.
How is the HJ2316-E angular ring fitted onto the shaft?
The angular ring is slid axially onto the shaft directly onto the inner ring of the cylindrical roller bearing. The machined side face faces the rolling elements, so as to act as a guide flange. A clean axial contact with the shaft shoulder is required to prevent tilting during operation.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/
10001277