Deep Groove Ball Bearings FAG 6326 -M

The 6326-M deep groove ball bearing from FAG Rolling Bearings, with dimensions of 130 x 280 x 58 mm and a brass cage, offers a robust solution for heavy-duty industrial applications.

The 6326-M deep groove ball bearing is a single-row rolling bearing for shafts with a diameter of 130 mm. Manufactured from standard rolling-bearing steel (100Cr6), this radial ball bearing primarily accommodates high radial forces as well as axial forces in both directions. This design is from FAG Rolling Bearings and has an outer diameter of 280 mm and a width of 58 mm. As an open bearing, it can be lubricated directly via the machine’s lubrication system.

What is the 6326-M deep groove ball bearing suitable for?

This deep-groove ball bearing is primarily used in general mechanical and plant engineering, where heavy shafts need to be supported. Design engineers prefer to use the open design in enclosed housings with centralised oil or grease lubrication. Thanks to its design for operating temperatures ranging from -20 to +150 degrees, the component is suitable for demanding thermal conditions. The design is aimed at bearing locations where high radial loads and axial forces must be continuously absorbed.

What are the advantages of the brass cage in the 6326-M deep groove ball bearing?

The suffix ‘-M’ denotes a solid brass cage that guides the rolling elements precisely. Brass is characterised by its dimensional stability under vibrations and dynamic shock loads. Furthermore, the bearing has tolerance class P0 (standard tolerance or ABEC 1) and standard radial clearance. When designing the application, it should be noted that open roller bearings require an external housing seal to protect against dirt and moisture in order to prevent premature wear.