Deep Groove Ball Bearings SKF 6310 -2RS1

The SKF 6310-2RS1 deep groove ball bearing has standardised dimensions of 50x110x27 mm and provides effective protection against contamination thanks to seals that seal on both sides.

The SKF 6310-2RS1 deep groove ball bearing is designed as a single-row rolling bearing to accommodate radial forces as well as axial loads in both directions. Manufactured from standard roller bearing steel (100Cr6), the component features a sheet steel cage and standard radial clearance. Thanks to its manufacture to tolerance class P0 (ABEC 1), the design is suitable for precision-fit industrial applications. The cylindrical outer ring has no flange or ring groove.

What is the 6310-2RS1 deep groove ball bearing suitable for?

This rolling bearing is suitable for rotating shaft mountings in mechanical engineering where shafts with a diameter of 50 mm are supported. It absorbs radial loads and withstands axial forces in both directions. Users primarily choose this design for operating environments where dirt particles or moisture are present, as the seals on both sides shield the interior of the bearing from external influences.

What protection does the 2RS1 seal offer?

The designation 2RS1 stands for sliding seals fitted on both sides. The sealing lips come into contact with the inner ring and keep dust and moisture away from the rolling elements and raceways. The bearing is specified for operating temperatures ranging from -20 to +120 degrees. Before installation, check whether the standard radial bearing clearance specified by the manufacturer is compatible with the intended fits of the shaft and housing.