Deep Groove Ball Bearings SKF 6210 -2RS1

The SKF 6210-2RS1 deep groove ball bearing, measuring 50x90x20 mm, features seals on both sides to ensure reliable radial load transmission in industrial applications.

The 6210-2RS1 deep groove ball bearing provides users with a single-row rolling bearing from SKF that primarily accommodates radial loads as well as axial guidance forces. Manufactured from standard roller bearing steel (100Cr6), this version combines a 50 mm inner bore with an outer diameter of 90 mm and a width of 20 mm. Thanks to the contact seals fitted on both sides, the component is suitable for direct installation in industrial drives, pump systems and conveyor systems.

In which industrial environments is the 6210-2RS1 deep groove ball bearing used?

The design proves particularly effective in units where protection against external environmental influences such as dust, dirt or moisture is required. Typical applications include electric motors, industrial fans and enclosed gearbox stages in general mechanical and plant engineering. The single-row deep-groove ball bearing absorbs radial forces during continuous operation. Thanks to its deep raceways, it guides the shaft accurately in both directions, even under moderate axial loads.

What are the advantages of the double-sided 2RS1 seal?

The 2RS1 design features abiding seals on both end faces. These sealing lips shield the interior against solid particles and splash water, whilst minimising lubricant leakage. Together with the standard radial bearing clearance and the lightweight sheet steel cage, the bearing is designed for a temperature range of –20 to +120 degrees Celsius. The tolerance class P0 or ABEC 1 ensures standardised dimensional accuracy for precise bearing seats.