Deep Groove Ball Bearings SKF 6207 -2RS1

The 6207-2RS1 deep groove ball bearing from SKF, measuring 35x72x17 mm, offers protection against the ingress of dirt thanks to seals that seal on both sides.

The 6207-2RS1 deep groove ball bearing is a single-row radial ball bearing made from 100Cr6 bearing steel with a cylindrical bore. The design primarily accommodates radial forces, but is also suitable for axial loads in both directions. The integrated seal ensures that the lubricant remains protected inside the bearing. This bearing from SKF is used in industrial drive systems and mechanical assemblies where protected operation is required.

What is the 6207-2RS1 deep groove ball bearing suitable for?

This deep-groove ball bearing is used in shaft mountings that need to be protected against dirt particles or moisture. The design is suitable for general rotating assemblies in mechanical engineering where moderate speeds are present alongside axial and radial forces acting from both directions. The outer ring has no flange or groove, meaning the unit can be fitted into smooth housing bores. With a permissible temperature range of –20 to +120 degrees, the bearing meets the requirements of standard industrial operating environments.

What is the function of the 2RS1 seal and the sheet steel cage?

The suffix 2RS1 denotes abutting, sliding sealing discs on both sides. The sealing lips rest against the inner ring and help to seal the interior against contaminants. Inside, a sheet steel cage guides the rolling elements evenly along the raceways. The version with standard radial bearing clearance ensures appropriate operating clearance under normal installation conditions without excessive heating. The component complies with tolerance class P0 or ABEC 1.