Deep Groove Ball Bearings SKF 61816

The SKF 61816 deep groove ball bearing features a very low-profile design, with a bore of 80 mm, an outside diameter of 100 mm and a width of 10 mm.

The SKF 61816 deep groove ball bearing is a single-row rolling bearing made from standard bearing steel (100Cr6) for shaft designs subject to radial loads. Due to its small cross-section, this component is particularly suitable for applications where the outer diameter must be as compact as possible for a given 80 mm shaft. The open design without sealing washers allows for direct lubricant supply via the surrounding system. An integrated sheet steel cage guides the rolling elements at operating temperatures ranging from –20 to +120 degrees Celsius.

What loads does the 61816 deep groove ball bearing accommodate within the installation space?

Designs primarily utilise the 61816 deep-groove ball bearing when assemblies with large shaft diameters require minimal radial installation space. The rolling bearing primarily accommodates radial forces as well as moderate axial forces in both directions. Typical applications are found in sealed housings, where the open bearing is protected from external particles and is lubricated via the central lubrication system.

What should be taken into account when fitting and operating the 61816 open deep groove ball bearing?

When installing the open bearing, it is essential to work in a clean environment, as dirt particles can easily reach the open raceways. The component features the standard radial clearance and the standard tolerance class P0 (PN or ABEC 1). A cylindrical outer ring without a flange or groove allows it to be pressed directly into smooth housing bores. A proper lubrication supply helps to maintain operation within the specified temperature range of –20 to +120 degrees Celsius.