-
Bearings
Bearings
-
Housings/housing Units
Housings/housing Units
-
Linear Technology
Linear Technology
-
V-Belts
V-Belts
-
Seals
Seals
FAG
Deep Groove Ball Bearings FAG 6024 -2RSR
- Technical data
- Inner diameter
- 120 mm
- Outer diameter
- 180 mm
- Width
- 28 mm
- Material
- Standard bearing steel
- Ball rows
- Single row bearing
- Seal
- Contact seal on both sides
- Cage
- Sheet steel cage
- Clearance
- Normal radial clearance
- Running accuracy
- Tolerance class P0/PN2 / ABEC 1
- Current insulation
- No current insulation
- Bore
- Cylindrical bore
- Outer ring
- Without flange/groove
- Material of rolling elements
- Standard bearing steel
- Temperature range
- -20 to +100 °C
- Weight
- 2,25 kg
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 10 | 8,75 € | 166,07 € |
| 20 | 17,49 € | 157,33 € |
Deep Groove Ball Bearings FAG 6024 -2RSR
The 6024-2RSR deep groove ball bearing from FAG Wälzlager, measuring 120 x 180 x 28 mm, offers protection on both sides via seals for demanding industrial and mechanical engineering applications.
The single-row deep groove ball bearing 6024 -2RSR from FAG Wälzlager is suitable for withstanding radial loads as well as moderate axial forces in both directions. Manufactured from standard roller bearing steel (100Cr6), this roller bearing has a bore of 120 mm, an outside diameter of 180 mm and a width of 28 mm. Thanks to the guided sheet steel cage and the standard radial clearance, the bearing operates with low vibration and maintains dimensional accuracy in accordance with tolerance class P0 (ABEC 1). This design is therefore suitable for a wide range of industrial applications.
What is the 6024 -2RSR deep groove ball bearing suitable for in operation?
In industrial drive applications, the 6024 -2RSR deep groove ball bearing primarily transmits radial forces acting perpendicular to the shaft. The design, which has no flange or groove on the outer ring, facilitates installation in cylindrical housing bores. Thanks to its design for operating temperatures ranging from –20 to +100 degrees Celsius, the component meets typical requirements in general mechanical engineering. Industrial buyers and maintenance engineers value the combination of standardised mounting dimensions and smooth running under continuous operating conditions.
What protection do the 2RSR seals on this rolling bearing offer?
The seals, which make contact on both sides, protect the rolling element chamber from ingress of particles and moisture, whilst retaining the lubricant inside the bearing. Compared with open bearings, this eliminates the need for external sealing elements on the shaft. When designing the system, it should be noted that the sliding seal lips can affect the rotational speed compared to open variants due to the frictional contact. For use in slightly contaminated environments, this sealed design offers an easy-to-install solution.
What are the dimensions of the 6024-2RSR deep-groove ball bearing?
This deep-groove ball bearing has an inner diameter of 120 mm, an outer diameter of 180 mm and a width of 28 mm. These dimensions comply with standard specifications and allow for direct installation in cylindrical bearing seats without a groove or flange.
What does the suffix -2RSR mean for this bearing?
The designation 2RSR indicates sliding seals fitted on both sides that come into contact with the inner ring. These sealing lips seal off the internal space, minimise lubricant leakage and keep foreign particles and splash water away from the raceways. This makes the bearing particularly suitable for dusty operating environments.
What is the temperature range for which the 6024-2RSR deep-groove ball bearing is designed?
The permissible temperature range is between -20 and +100 degrees Celsius. This range is essentially limited by the material of the sliding seals and the lubrication system, which is why operation within this range is crucial for the service life of the sealing lips.
What does the specification for the standard radial bearing clearance mean?
Standard radial bearing clearance refers to the radial clearance between the balls and the raceways as specified by the manufacturer when the bearing is in its unassembled state. It is suitable for standard fit conditions and operating temperatures at which no significant thermal expansion occurs between the inner and outer rings.
What material is the deep-groove ball bearing made of?
The rings and rolling elements are made from standard roller bearing steel (100Cr6), which ensures strength and resistance to roller fatigue. The integrated cage is made from sheet steel, which keeps the component weight low and guides the rolling elements even during dynamic movements.
Which tolerance class does this roller bearing correspond to?
The bearing is manufactured to tolerance class P0 or PN, which corresponds to the ABEC 1 standard. This standard tolerance defines limit dimensions for the bore, outer diameter and radial runout, suitable for the typical requirements of industrial mechanical engineering.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/
10014187