Deep Groove Ball Bearings FAG 6016 -2RSR

The FAG 6016-2RSR deep-groove ball bearing, measuring 80 × 125 × 22 mm and featuring a sliding seal on both sides, provides protection against dirt and moisture.

The single-row deep groove ball bearing 6016 -2RSR primarily accommodates radial loads as well as moderate axial loads in both directions. Manufactured from standard rolling bearing steel 100Cr6, this bearing is characterised by dimensional stability and smooth running. With a bore of 80 mm, an outer diameter of 125 mm and a width of 22 mm, this version complies with the standard tolerance class P0/PN (ABEC 1). A sturdy sheet steel cage guides the rolling elements evenly in the deep raceway of the outer and inner rings.

What is the 6016-2RSR deep-groove ball bearing suitable for?

This deep-groove ball bearing is suitable for rotating shafts and general mechanical engineering applications with a shaft diameter of 80 mm. Designs in dusty or damp environments benefit from the double-sided sealing, which reduces grease leakage and prevents the ingress of solid particles. With a permissible temperature range of -20 to +100 degrees, the unit covers typical operating conditions in continuous drive applications.

What advantage does the 2RSR seal offer over open bearings?

The 2RSR seal, which seals on both sides, effectively seals off the interior of the bearing against dirt, dust and splash water. In this FAG bearing, the elastic sealing lips come into contact with the inner ring, which provides a high level of protection but results in a slightly higher friction torque than non-contacting cover plates. Furthermore, the factory-fitted grease filling simplifies maintenance, as no immediate relubrication is required during normal operation. When designing the application, ensure that the operating temperatures remain between -20 and +100 degrees.