Deep Groove Ball Bearings FAG 6010 -2Z

The FAG 6010 -2Z deep-groove ball bearing, with a 50 mm bore and cover plates on both sides, offers robust protection for industrial rotary movements.

The single-row deep-groove ball bearing 6010 -2Z from FAG accommodates radial loads as well as axial forces in both directions. Manufactured from standard rolling bearing steel 100Cr6, the unit has the following main dimensions: a bore diameter of 50 mm, an outside diameter of 80 mm and a width of 16 mm. A dimensionally stable sheet steel cage guides the rolling elements evenly into the deep raceways. Thanks to its standard radial clearance, the bearing is suitable for standard fits in industrial plant and general mechanical engineering.

What loads can the 6010-2Z deep-groove ball bearing accommodate?

The deep-groove ball bearing primarily supports radial loads and guides rotating shafts even when axial forces act on both sides. As the outer ring and rolling elements are made from standard 100Cr6 bearing steel, dimensional stability is maintained within a temperature range of -30 to +120 degrees Celsius. The cylindrical outer ring without a flange allows for direct mounting in standardised housing bores, thereby minimising installation effort.

What is the function of the cover plates in the 2Z design?

The suffix 2Z denotes cover plates made of profiled sheet steel fitted on both sides. These gap seals protect the bearing interior from coarse dirt particles, dust and foreign matter without generating additional friction on the rotating inner ring. As a result, the ball bearing achieves high speeds with low heat generation. For dry environments with solid particle contamination, the non-contacting 2Z variant offers the appropriate protection.