Deep Groove Ball Bearings SKF 6413

The SKF 6413 deep groove ball bearing is an open, single-row rolling bearing measuring 65 × 160 × 37 mm, designed for high radial and axial loads.

This single-row deep groove ball bearing 6413 from SKF primarily absorbs radial forces whilst also supporting axial loads in both directions. Manufactured from standard 100Cr6 bearing steel, the component features a robust design with an inner diameter of 65 mm, an outer diameter of 160 mm and a width of 37 mm. Together with the sheet steel cage and standard radial clearance, the bearing is suitable for a wide range of industrial applications involving combined load conditions.

Under what operating conditions does the 6413 deep-groove ball bearing operate?

The bearing is designed for applications in mechanical and plant engineering where high radial forces are combined with axial forces on both sides. Due to its open design without integrated sealing washers, the rolling bearing can be integrated directly into a customer-supplied lubrication system using oil or grease. The permissible temperature range extends from –20 to +120 degrees Celsius, meaning the bearing meets the thermal requirements for normal operation.

What are the key features of the open design without seals?

The open design allows unhindered access of the lubricant to the raceways and rolling elements. As no sliding seals are fitted, lower frictional resistance occurs during operation. The rolling bearing complies with standard tolerance class P0 or ABEC 1 and has a cylindrical outer ring without a flange or groove. To ensure correct operation, a suitable housing seal must be fitted to prevent the ingress of dirt particles and to retain the lubricant within the bearing area.