Deep Groove Ball Bearings SKF 6016 -2RS1/C3

The SKF 6016 -2RS1/C3 deep groove ball bearing combines dimensions of 80x125x22 mm with double-sided sealing and increased C3 bearing clearance for industrial applications subject to thermal stress.

The 6016 -2RS1/C3 deep groove ball bearing is a single-row radial ball bearing made from standard rolling-element steel (100Cr6) in the SKF Explorer design. The component primarily accommodates radial forces as well as axial loads in both directions. Thanks to its manufacture to P6 dimensional accuracy and PN running accuracy, the 6016 deep groove ball bearing is suitable for precisely guided shafts in mechanical and plant engineering. As a rolling bearing for maintenance and series production, it meets requirements for fit accuracy and smooth running.

What is the 6016 -2RS1/C3 deep groove ball bearing suitable for in industrial applications?

This bearing is suitable for applications involving medium to high speeds where thermal effects or tight fits are present. Typical areas of application include electric motors, gearboxes, pumps and industrial drives. The robust sheet-steel cage guides the rolling elements precisely, even under dynamic loads. The seals, which contact the raceway on both sides, keep the lubricant inside whilst preventing the ingress of dirt particles and moisture.

What does the combination of C3 bearing clearance and 2RS1 seals mean?

The designation C3 indicates a slightly increased radial bearing clearance compared with the standard version. This additional clearance between the balls and raceways compensates for thermal expansion caused by temperature differences between the inner and outer rings. At the same time, the 2RS1 seal design protects the bearing from environmental influences within a temperature range of -20 to +120 degrees. Before installation, it must be checked whether the fits on the shaft and in the housing are designed to accommodate this bearing clearance.