6315 Deep Groove Ball Bearings by SKF
6315 Deep Groove Ball Bearings by SKF

SKF

Deep Groove Ball Bearings SKF 6315

Technical data
 
Inner diameter
75 mm
Outer diameter
160 mm
Width
37 mm
Ball rows
Single row bearing
Seal
None, open bearing
Cage
Sheet steel cage
Clearance
Normal radial clearance
Running accuracy
Tolerance class P0/PN2 / ABEC 1
Current insulation
No current insulation
Bore
Cylindrical bore
Outer ring
Without flange/groove
Material of rolling elements
Standard bearing steel
Version
Explorer
Heat stabilization
-20 to +120 °C
Material
Standard bearing steel
Weight
2,994 kg
Scale quantity Your discount Unit price
10 4,65 € 88,43 €
20 9,30 € 83,78 €
93,08 €
exkl. MwSt, zzgl. Versandkosten

66 ready to ship

Deep Groove Ball Bearings SKF 6315
In Stock

Deep Groove Ball Bearings SKF 6315

The SKF 6315 deep groove ball bearing accommodates both radial and axial loads and has dimensions of 75 x 160 x 37 mm.

The 6315 deep groove ball bearing is a single-row radial ball bearing characterised by its versatility. Manufactured from standard rolling bearing steel (100Cr6), this design features rolling elements housed in a sheet steel cage. With a bore of 75 mm, an outside diameter of 160 mm and a width of 37 mm, this SKF bearing in the Explorer performance class is primarily used where high speeds and combined loads are required in compact shaft mounting arrangements.

What loads and operating conditions can the 6315 deep groove ball bearing handle?

This rolling bearing primarily accommodates radial loads, but due to its design, it also accommodates axial loads in both directions. Typical applications include mechanical assemblies subject to combined forces. As the design does not incorporate integrated seals, this version is suitable for enclosed housings with an existing lubrication system. Under normal operating conditions, the standard radial bearing clearance ensures smooth running and a precise fit.

What are the distinctive features of the open design of the 6315 bearing?

The open design allows for a direct supply of lubricant via the surrounding machine housing, enabling operating temperatures ranging from -20 to +120 degrees. The absence of contact sealing discs results in lower friction losses, which facilitates higher speeds compared with sealed variants. During design, care must be taken to ensure that the bearing location remains protected from contamination by external sealing elements. Manufacture to tolerance class P0/PN ensures dimensional interchangeability.

What are the dimensions of the 6315 deep-groove ball bearing?

With an internal diameter of 75 mm, an external diameter of 160 mm and a width of 37 mm, the bearing complies with the standardised main dimensions. The cylindrical outer ring has no flange or groove. This allows for direct installation in standardised housing seats and onto suitable shafts.

What are the characteristics of the open bearing design?

An open roller bearing operates without any friction-causing sealing elements, which keeps the frictional torque low during operation. This facilitates high limit speeds and allows the lubricant to be supplied via the housing system. Its use is recommended in clean environments or in enclosed designs with external sealing.

What does the specification for the standard radial bearing clearance mean?

This value indicates the standard radial clearance between the rolling elements and the raceways when the bearing is unmounted. This clearance ensures that the bearing rings can rotate freely at normal operating temperatures and with standard mounting fits, thereby compensating for thermal expansion during operation.

Within what temperature range can the bearing be operated?

The permissible operating temperature ranges from -20 to +120 degrees. The components made from 100Cr6 roller bearing steel and the guided sheet steel cage retain their dimensional stability within this range. The lubricant selected should be suitable for the intended temperature range.

What does the tolerance class P0/PN or ABEC 1 mean?

This classification defines the permissible dimensional and runout tolerances in accordance with standard specifications. Class P0 represents the general industry standard and is designed to ensure a precise fit when mounted on shafts or in housings, without requiring above-average manufacturing tolerances on the mating components.

What material are the rings and cage made of?

The rings and rolling elements are made from standard roller bearing steel (100Cr6). The integrated cage is made from sheet steel. It keeps the balls at a uniform distance from one another during rotation.

SKF Group
Sven Wingquists Gata 2, 415 50 Gothenburg, Sweden
info@skf.com, https://www.skf.com/uk/footer/site-ownership

10016734
Product added to compare.
Product added to wishlist

Reset Password

New Account Register