Deep Groove Ball Bearings FAG 6214 -2RSR

The 6214-2RSR deep-groove ball bearing from FAG Rolling Bearings, measuring 70 x 125 x 24 mm, offers protection against contamination on both sides under radial loads.

The 6214-2RSR deep groove ball bearing is a single-row radial ball bearing made from 100Cr6 rolling bearing steel for industrial use. With a bore diameter of 70 mm, an outside diameter of 125 mm and a width of 24 mm, this roller bearing primarily absorbs radial forces. Thanks to its deep-groove geometry, the design simultaneously transmits axial loads in both directions. This ready-to-use component from FAG Rolling Bearings is designed for a wide range of shaft mountings.

In which applications does the 6214-2RSR deep groove ball bearing prove its worth?

This radial deep-groove ball bearing is suitable for applications in general mechanical engineering involving combined loads. Designers use size 6214 in shaft guides where precise guidance is required. As it is manufactured to tolerance class P0 (ABEC 1), the component can be fitted precisely into housing seats and onto cylindrical shafts. A sheet steel cage guides the rolling elements evenly within the raceway system.

What are the operational benefits of the 2RSR seal?

The double-sided seal protects the interior of the bearing against the ingress of dust, moisture and solid particles. At the same time, the seal contact retains the lubricant inside the bearing. In conjunction with the standard radial bearing clearance, this rolling bearing is suitable for operating temperatures ranging from -20 to +100 degrees. Designs featuring this seal configuration reduce maintenance requirements, as relubrication is not required within the normal operating window.