Deep Groove Ball Bearings FAG 6007 -N

The FAG 6007-N deep-groove ball bearing is an open rolling bearing with a groove in the outer ring and dimensions of 35 × 67.7 × 14 mm.

The FAG 6007-N deep groove ball bearing is designed to support rotating machine components under predominantly radial loads. Manufactured as an open, single-row bearing from standard roller bearing steel (100Cr6), it allows direct access to lubricant via the surrounding oil or grease circuit. Thanks to its standard radial clearance, this design is suitable for tried-and-tested standard fits at operating temperatures between –30 and +120 degrees Celsius.

In which applications is the 6007-N deep groove ball bearing used?

This bearing is primarily used in designs where a defined axial fixation in the housing seat is required. The design accommodates radial forces as well as moderate axial forces in both directions. As the rolling bearing is not factory-sealed, it is suitable for enclosed mounting spaces where lubrication is supplied from the outside and no foreign particles can enter the bearing interior.

What advantages does the ring groove in the outer ring offer for installation?

The suffix -N indicates a milled ring groove in the outer ring. This groove is designed to accommodate a suitable retaining ring, thereby securing the bearing axially in the housing bore via a positive fit. There is no need for complex housing shoulders or additional retaining caps, which saves installation space and simplifies the manufacture of the bearing seat. A sheet steel cage guides the rolling elements and keeps frictional resistance low.